| WBQ ADJUSTMENT PILES |
 | PARAMETER
WBQ F76X800/1000/1200/1500/1600
Article number：WBQ F76X800/1000/1200/1500/1600
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：800/1000/1200/1500/1600mm
Pipe outer diameter：76mm
Pipe wall thickness：3-4mm
Flange diameter：150mm
Spiral pitch：40/50/60mm
Spiral thickness：2-3mm
Spiral width：10mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1
|
|
| WBQ EXTENSION PILES |
 | PARAMETER
WBQ F76-140X5000-12000
Article number：WBQ F76-140X5000-12000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：5000-12000mm
Pipe outer diameter：76-140mm
Pipe wall thickness：4-12mm
Flange outer diameter：150-500mm
Flange thickness：8mm-16mm
Spiral pitch：40/50/60mm
Spiral thickness：2-6mm
Spiral width：10-100mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1 |
|
| WBQ STREET LAMP GROUND PILES |
 | PARAMETER
WBQ F76-114X2000/2500/3000/3500/4000
Article number：WBQ F76-114X2000/2500/3000/3500/4000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：2000/2500/3000/3500/4000mm
Pipe outer diameter：76-114mm
Pipe wall thickness：3-6mm
Flange outer diameter：200-500mm
Flange thickness：8-16mm
Spiral pitch：75mm
Spiral thickness：3-6mm
Spiral width：50-178mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1 |
|
| WBQ GROUND PILES WITH FINS |
 | PARAMETER
WBQ F76/89/114X1600/1800/2000/2500/3000
Article number：WBQ F76/89/114X1600/1800/2000/2500/3000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：1600/1800/2000/2500/3000mm
Pipe outer diameter：76/89/114mm
Pipe wall thickness：3-4mm
Spiral pitch：40/50/60mm
Spiral thickness：2-3mm
Spiral width：10/15/20mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1
|
|
| WBQ OIL PIPELINE GROUND PILES |
 | PARAMETER
WBQ F76X1600/1800/2000/2500/3000
Article number：WBQ F76X1600/1800/2000/2500/3000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：3000/3500/4000mm
Pipe outer diameter：76mm
Pipe wall thickness：3-4mm
Flange diameter：150/160/200mm
Spiral pitch：40/50/60mm
Spiral thickness：2-3mm
Spiral width：10/15/20mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1 |
|
| WBQ C-CHANNEL STEEL PILES |
 | PARAMETER
WBQ C80-300X1600/1800/2000/2500/3000
Article number：WBQ C80-300X1600/1800/2000/2500/3000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Thickness：2-6mm
Length：3000/3500/4000mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1
|
|
| WBQ I-BEAM STEEL GROUND PILES |
 | PARAMETER
WBQ HW wide flange type/HM medium flange type/HV narrow flange type/HT thin flange type/
Article number：WBQ HW/HM/HV/HTX1600/1800/2000/3000/4000
Material：Q235B/Q355B
Surface treatment：Hot dip galvanized,average thickness 80μm
Length：1600/1800/2000/3000/4000mm
Technical requirement
1.Hot dipped galvanized to DIN EN ISO 1461, average coating 80um.
2.No distortion, no sharp edge.
3.Tolerance: Standard GB/T1804-V, Hole position ±1, hole dia. ±1
|
|
| WBQ PHC PIPE PILES |
 | PARAMETER
WBQ 300/400/500/600/700/800/1000XA/AB/B/C X wall thickness X 3-12
Article number：WBQ 300/400/500/600/700/800/1000XA/AB/B/C X wall thickness X 3-12
Material：prestressed high-strength concrete
Concrete effective pre compression stress value：Type A,AB,B,C
Concrete strength：≥C80
Outer diameter：500-1000mm
Wall thickness：70-130mm
Pile length：5-12 Meters
Technical requirement
1.The surface is flat,the color is uniform,the depth of corner drop is ≤10mm,and the honeycomb area is less than 5% of the total area.
2.Finished pile cracks(shrinkage cracks or cracks caused by lifting,shipping,and stacking):depth≤20mm,width≤0.25mm,transverse cracks not exceeding half of the side length.
|
|
|
